RRP ProGuard Mudguard Black

RRP ProGuard Mudguard Black
Description

The ProGuard is an amazing front mudguard for mountain bikes offering unmatched protection from mud and spray, it’s perfect for Enduro or Downhill racers and essential for the weekend warrior looking for the very best protection. Our design intent was to increase the tyre clearance, improve fit, and reduce the mud clogging issues seen with this type of mudguard. The STANDARD offers superb protection in a shorter more compact design, whereas the longer MAX PROTECTION version (21mm longer at front and 68mm longer at the rear) offers incredible levels of protection especially for high speed racing.

Available in 2 sizes

  • Standard: (119g - without zip ties)
  • Max Protection: (133g - without zip ties)

The ProGuard range of mudguards have a soft high gloss finish which is a characteristic of our highly polished mold and our special polypropylene mix, this unique mix has been specifically blended for:

Cold Weather Strength
High Impacts
High Flexibility
High Durability

As a result of achieving the above properties it means that the surface layer is soft and will scratch easily, you must also be careful about putting any chemicals onto the surface as it may tarnish the finish and invalidate the warranty. That said we have tested and can recommend the following chemicals to use:

Silicone - Spray high quality 100% silicone onto surface and very gently remove with a clean cloth to maintain a high gloss finish and to stop dirt and water from sticking.

GT85 - Rub this over the surface if you want to remove the gloss and display a matte finish to match your bike.

NB: REMEMBER – ADD ANY STICKERS BEFORE YOU USE EITHER OF THE ABOVE CHEMICALS ON THE MUDGUARD OR THEY WILL NOT STICK

Any other chemicals other than what is listed above should not be used on the ProGuard mudguards or it will invalidate the warranty.

Proguard Features Include:

  • Indent For Fork Brace Giving Extra 4mm Of Tyre Clearance
  • 24 Crown Holes That Offer A Massive Amount Of Fit Options
  • Snap-Off Hole Covers Reduce Spray From Travelling Through Unused Holes
  • Long Front To Cope With High Speed Spray
  • Smaller Turn Down At Front For Better Tyre Clearance And To Reduce Blockages
  • Rear Flick Offers Even More Protection When The Wheel Is Turned
  • Sticker Recess Offers Greater Protection For Sticker Adhesive
  • Seal Protection Increased With Our Aclaimed Seal Guard Design
  • Max Protection Version Is 68mm Longer
  • WEIGHT - STANDARD: 119g - without zip ties
  • WEIGHT - MAX PROTECTION: 133g - without zip ties
  • WHEELS: 26” 27.5” 29”
  • TYRES: up to a 3” tyre
  • FORKS: All forks including Boost forks (except reverse arch)
  • TRAVEL: Any travel

INDENT
A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed.

FRONT
The front has been made longer than some of the offerings out there as we see this is an area that can significantly improve the protection of the face and eyes when riding at high speed. Our turn down at the front deflects the spray downwards without clogging with mud which causes blockages

SNAP-OFF HOLE COVERS
We have added hole covers that reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screw driver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including BOOST forks (except reverse arch), this allows you to customise your fit

REAR FLICK
The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned

STICKER RECESS
The recess down the centre is a nice easy reference to apply our coloured stickers to, but it has a more important job, this recess prevents the sticker having to sit proud on the surface of the guard making it vulnerable to durability and jet wash issues. The supertack glue used on our stickers is strong, although it’s fair to say that no sticker is able to withstand a sustained attack from a powerful jet wash, although the recess does prevent a direct hit

SEAL GUARD
Our widely acclaimed Seal Guard has made it to the PROGUARD as a means of offering greater protection for your seals from high velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex

MAX PROTECTION VERSION
We offer the longer MAX PROTECTION version to be the best protection in the world, this version is 68mm longer at the rear. No other mudguard offers more protection

COLOUR OPTIONS
We thought long and hard about colour options which is important to many riders, we offer the PROGUARD in plain black, or plain black with the logo’s coloured (11 different colours), if that’s not enough we also offer 11 different coloured stickers that run down the length of the mudguard, this allows the rider to choose from several options to get the look they want.

MATERIAL
We decided to make our mudguard material slightly thicker than some offerings which together with our unique polypropylene mix gives great flexibility, durability and strength

ZIP TIES
6 zip ties are provided with each mudguard, the holes on the side arms are mandatory requiring 4 leaving the other 2 for the fork brace (although more could be added if desired)

Delivery
We offer free shipping on all orders over £20. Shipping on orders under £20 is charged at £1.95. You should expect to receive your order in 2-3 working days. If your order is urgent you can select a faster or next-day delivery option at the checkout. UK orders are posted with Royal Mail, Hermes or Parcelforce. If you have a specific delivery requirement please contact us and we will do our best to accommodate you. For further information please see our Delivery Information page
Returns
If you are not completely satisfied with your goods you may return them within 60 days for a full refund or exchange. All items returned must be in 'as new' condition and be complete with their original packaging. Please make sure the packet is packaged well and do not stick anything directly to the item's packaging which could damage it. For further information please see our Returns Information page
Product Features
  • Colour: Black
Reviews
said...
"Good quality item, easy to fit only a few minutes, for those who do not want gloss, spray all over with GT85 give the mudguard a good wipe and a buff up and your mudguard becomes mat, as my bike is mat blake it looks fabulous "
said...
"Bought this for extra cover and more critically clearance for a 2.5 Shorty I'm running. The Mudhugger I had just didn't offer enough clearance. The product is amazing and the service excellent as always. Cheers."

Item: RRPMG1

MPN: RRP-PGPB

In stock

Choose Size:
from £24.99 inc VAT

Home Delivery

UK mainland delivery from FREE

check delivery cost

Loyalty Scheme

Earn up to 26 loyalty points with this product.

You may also like...


MudHugger Front Race Guard
MudHugger Front Race Guard
£24.99 inc VAT
Rockshox MTB Front FenderRockshox MTB Front Fender
Rockshox MTB Front Fender
£10.95 inc VAT

People who bought this also bought...


Burgtec Bartender Grips
Burgtec Bartender Grips
£15.99 inc VAT


Fox Indicator LS Moth Jersey
Was £46.99 Now £32.99 inc VAT
Fox 8 Inch Trail Socks 2018Fox 8 Inch Trail Socks 2018
Fox 8 Inch Trail Socks 2018
£12.99 inc VAT