• display as grid Grid
  • display as list List

Burgtec Enduro MK2 StemBurgtec Enduro MK2 Stem
Burgtec Enduro MK2 Stem
New to Burgtec's product range is the Enduro MK2 stem. The stem has been designed for all the abuse the Trail and Enduro Market can throw at it. It's super stiff design helps riders to negotiate the trickiest offroad descents. Available in 2 reaches 35mm and 50mm and 3 different colours. Burgtec Black, Race Red and Deep Blue. The 35mm stem comes in at a lightweight 120g including steel hardware. The...
from £79.99 inc VAT
Deity Copperhead StemDeity Copperhead Stem
Deity Copperhead Stem
Deity's goal with the all new COPPERHEAD steerer mounted stem was to design a lighter sidekick to our beloved Cavity Stem, but the results delivered a stronger, refined, and lighter super hero that we just could not break. All our designs are tested to failure, but the COPPERHEAD refused to give up! After millions of cycles on both stress and impact testing this stem refused to give an inch. At a super...
£94.95 inc VAT

Gusset S2 AM Stem 31.8mmGusset S2 AM Stem 31.8mm
Gusset S2 AM Stem 31.8mm
No rise, short extension, low stack height stem Ready for the rough stuff. We optimised stiffness for precise handling and control when riders are pushing the limit. The faceplate fits with a zero gap on the upper bolts to tighten fit tolerance and stiffness in the cockpit set up. By leaving a gap on the lower bolts, we allow the bars to fit precisely with equal torque across the faceplate and bolts. With...
£69.99 inc VAT
Gusset S2 AM Stem 35mmGusset S2 AM Stem 35mm
Gusset S2 AM Stem 35mm
No rise, short extension, low stack height stem Ready for the rough stuff. We optimised stiffness for precise handling and control when riders are pushing the limit. The faceplate fits with a zero gap on the upper bolts to tighten fit tolerance and stiffness in the cockpit set up. By leaving a gap on the lower bolts, we allow the bars to fit precisely with equal torque across the faceplate and bolts. With...
£69.99 inc VAT

Hope AM/Freeride 31.8mm StemHope AM/Freeride 31.8mm Stem
Hope AM/Freeride 31.8mm Stem
Our AM/freeride stem is light, stiff and available in 35, 50 and 70mm lengths with different rise and colour options Key Features CNC machined from 2014 T6 aluminium Designed for oversized 31.8mm bars Lengths- 35, 50 & 70mm Zero degree rise Tech Specs All stems are CNC machined from a solid billet of 2014 T6 aluminium The AM stem range has been redesigned with more material taken...
£79.95 inc VAT
Joystick Binary StemJoystick Binary Stem
Joystick Binary Stem
It’s 1st or nothing when it comes to racing. The Binary stem is light but maintains the strength and stiffness necessary to deliver consistent race-winning performance. This fully CNC-machined stem has an incredibly precise bar interface that’s light enough for your race bike and strong enough for gravity rides. Available in 35mm and 50mm lengths, the Binary stem uses a carbon and alloy...
£89.99 inc VAT

Joystick Builder 31.8mm StemJoystick Builder 31.8mm Stem
Joystick Builder 31.8mm Stem
Support the Trails and Your Local Trail Builder! As part of our Trail Builder series this stem was designed to hold like a trail builder’s grip on their tools. This fully CNC-machined stem has an incredibly precise bar interface that’s light enough for your race bike and strong enough for gravity rides. Available in 35mm, 50mm and 65mm lengths, the Builder stem uses a carbon and alloy...
£79.99 inc VAT
Race Face AEffect 35 StemRace Face AEffect 35 Stem
Race Face AEffect 35 Stem
Æffect 35 stem is a new design that brings the advantages of 35 to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. Product Features Forged and machined from 6061 aluminum Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body. Specifications Colour: BLACK Built For: XC/Trail Steer Tube Diameter:...
£35.95 inc VAT

Race Face Atlas 35 StemRace Face Atlas 35 Stem
Race Face Atlas 35 Stem
The Atlas 35 stem was designed to reduce overall system weight while retaining the proven stiffness and performance the Atlas line is known for. The stem itself is measurably stiffer than the 31.8mm offering and, although the system is a seemingly burlier build, the weight savings gained by the reduction in bar material actually makes the 35 system lighter overall. An impressively light, strong addition...
£71.95 inc VAT
Renthal Apex 31.8mm StemRenthal Apex 31.8mm Stem
Renthal Apex 31.8mm Stem
The Renthal Apex stem covers all sectors of mountain bike. Light enough for XC racing, stiff and strong enough for a 780mm handlebar. The Renthal Apex stem features our unique new clamping system. This allows much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars. The clamps are inserted over the small diameter section of the handlebar...
£76.45 inc VAT

Renthal Apex 35 StemRenthal Apex 35 Stem
Renthal Apex 35 Stem
Our challenge with the Apex and Integra stems, was to keep the strength, stiffness and durability of the larger 35mm diameter package at the same weight as the 31.8mm equivalent. The strength, stiffness and durability were all matched to the 31.8mm equivalent, with and average of just an average of 7g added to the Apex. This all-new Renthal Apex stem covers all sectors of mountain bike. Light enough...
£76.45 inc VAT
Renthal Integra 35 Direct Mount StemRenthal Integra 35 Direct Mount Stem
Renthal Integra 35 Direct Mount Stem
Renthals challenge with the Integra 35 stems, was to keep the strength, stiffness and durability of the larger 35mm diameter package at the same weight as the 31.8mm equivalent. The strength, stiffness and durability were all matched to the 31.8mm equivalent, with and average of just 1.5g added to the Integra. The new Integra 35 Direct Mount stems feature the same lightweight, 6-bolt design as the...
£89.95 inc VAT